Multi-adhesive with satin appearance made of acrylic copolymers and polyurethane compounds for stone, metal, wood, cement, Monto, 500ml

Satin finish, multi-adhesive made with acrylic copolymers and polyurethane compounds that provide excellent adhesion and increased resistance to wear and external factors. Good blocking resistance. Ready to use. Odorless.

Ideal for interior and exterior surfaces made of gypsum, stone, metal (after priming), construction, cement mortars and wood.

CAREFUL!

For NEW SURFACES in:
Gypsum, cement and their derivatives
Wait until complete curing and clean any efflorescence from the surface and neutralize alkaline surfaces. Use a suitable putty to eliminate defects on the base.

For new WOODEN SURFACES:
Apply to wood with a moisture content of less than 20%. Sound, dry wood, well cleaned of dust and grease. If the wood shows signs of aging, it must first be sanded and primed, and dust must be removed by brushing or other mechanical means. Before applying the paint, apply a primer.

For SURFACES OF IRON and its derivatives, Galvanized metals and light metals and Products derived from gypsum, cement and paint:
Apply to dry substrates, thoroughly cleaned of dust and grease. If there are signs of oxidation, the rust must be removed by brushing or other mechanical means. Then, apply a primer before application.

Varnished or painted wood:
If they are varnished or painted with an open-pore glaze, if they are varnished with closed-pore varnishes, if they are varnished with cellulose-based or polyurethane varnishes or if they are enamelled with synthetic enamels, remove foreign products, remove any loose or flaking products, sand lightly, remove sanding dust and proceed as for new wood.