In stock

Two-component water-based epoxy primer, Epoxy Primer WB Nanophos

Can also be applied on fresh cement substrates.
Significantly reduces project completion time.
High resistance to corrosion and abrasion.
Strong adhesion to any type of substrate and final paint.
Odorless and environmentally friendly, water-based.
Ideal for bituminous substrates or where the presence of solvents must be avoided.
Excellent resistance to water and chemicals.

Amount 3L 10L

Practical Advice

It is recommended to clean the substrate with a high-performance vacuum cleaner before application.
The material must be applied within the working time of the mixture (approximately 1 hour, depending on environmental conditions), because its maturation is not visible in the mixing container. At low temperatures and/or high humidity, drying times can be extend.

100% surface protection or your money back!

Regular price: 296,00 lei
Regular price: ~~1.923,00 lei~~
Sale price: 296,00 lei

Tax included. Shipping calculated at checkout.

TECHNICAL DETAILS:

Coverage rate: 8 – 12 m2/L per layer.

Description

SurfaMix® Epoxy Primer WB is a transparent, two-component, water-based epoxy primer. Its specialized formula of durable organic materials provides strong adhesion on porous and non-porous surfaces and is compatible with any type of coating. It has exceptional resistance to abrasion as well as to contact with acids, alkalis, oils, cleaning agents and chemicals. It dries quickly and forms a hard, impact-resistant, non-absorbent layer. It can also be used as a primer for wet concrete or masonry surfaces. It is odorless, solvent free and V.O.C. compliant, so ideal for interior, poorly ventilated areas.

SurfaMix Epoxy Primer WB can be applied to slightly damp porous and non-porous substrates. Stabilizes absorbent concrete surfaces and prevents dust formation. It is applied on existing bituminous membranes, ceramic tiles, metal surfaces and well-adherent acrylic or polyurethane layers before applying any type of roof membrane. Suitable for applications subject to increased humidity and/or negative pressure (floors, swimming pools, storage tanks, building foundations, etc.).

Note this:

It is recommended to apply one coat using a roller or a brush. After 24-48 hours have passed after applying the primer and if the moisture content is less than 4%, apply the finishing coat.