Solution/Detergent Cleaning Stone, Paving, Exterior Concrete, Granite, Travertine, Cleaner Pro, NanoMax

Cleans surfaces of stains and lime deposits
Removes moss, lichens and fungi
Wide range of applications
Easy to apply

Amount 1 L 5L

Regular price: 27.92 лв
Regular price
Sale price: 27.92 лв

1x PIECE

Amount: 1 L

Add to cart

SAVE 5%

55.84 лв

SAVE 5%

2-5

Amount: 1 L

The most selected

Add to cart

SAVE 10%

27.92 лв

SAVE 10%

Amount: 1 L

Just to be sure

Add to cart

Practical Advice

Choose the right time to clean
Test on a hidden area before full application
Dilute properly according to the type of dirt
Apply evenly with brush, mop or sprayer
Rinse well with clean water

100% Surface Protection or Your Money Back!

Free 2 day shipping from €150

Description

NanoMax Cleaner Pro – Deep Cleaning Solution for Natural Stone, Concrete, Paving and More

NanoMax Cleaner Pro is a concentrated detergent based on natural citric acid, ideal for deep cleaning of cement, mortar, joints, plasters and natural or artificial stone surfaces. Effectively removes residue, moss, fungi and deep organic stains. Perfect for cleaning salts from efflorescence and suitable for building facades, concrete and paving slabs, clay tiles and other clay objects.

TECHNICAL DETAILS:

Volume:1L, 5L
Composition: Biodegradable ingredients, without aggressive acids
Compatibility: Stone, Paving, Cement, Travertine (with caution), Porous surfaces (not compatible with marble and surfaces glossy)
Eco-Friendly: Friendly to lawns and trees, biodegradable

pH: Acid

Recommended dilution:

Non-absorbent surfaces: 1:7 (glossy paving, terracotta, etc.)
Absorbent surfaces: 1:3-1:5 (porous natural stone or porous sandstone)
Granite, Travertine: 1:5-1:7, depending on the degree of soiling
Sandstone: 1:5-1:7

Application Instructions

The product can be used undiluted for tougher stains, or diluted at a rate of 1:5 for general cleaning.
Test the dilution.
Shake the bottle well and test on a hidden surface.
The detergent is poured or sprayed over the dirty surface.
Dilute the product 1:5 with water, adjust the dilution as needed and according to the surface you are applying.
Pre-wet the surface, apply the solution and wait 5 minutes.
Scrub with a soft brush or sponge.
Rinse with plenty of clean water. Repeat if necessary.

Note this:

It is not recommended for the following acid-sensitive surfaces: glossy decorative tiles, marble, limestone and sanitary ware. On dark colored surfaces (anthracite grey, dark grey, black) the dilution must be increased to 1:7 and rinse well, salt/detergent stains can be seen if not followed the instructions.